Jain Ceramic MartJain Stone & MarbleAuthorised Jaquar Dealer · Since 1999
Udaipur’s sanitary store and marble showroom in Hiran Magri, Sector 14 is coming online. Until then the showroom is open as usual — call, message or visit us.
Saturday, 3 October 2026 · 7:30 PM
B-Block, 291, Main Road, Sector-14, Hiran Magri, Gordhan Vilas Rural, Udaipur, Rajasthan 313001
Showroom open Mon – Sun · 10:00 AM – 8:00 PM
Follow the launch on Instagram @jainceramicmartudaipurDesign & Developed by Futurise Solutions, New Zealand
Authorised Jaquar Dealer in Udaipur · Serving Mewar since 1999
Astral Trubuild Distributor
Ask at the counter for current stock and pack sizes — we match the system to your surface, whether it is a new slab, an old terrace or a damp wall.
Systems for new roofs, and coatings to rehabilitate old, cracked terraces and balconies.
A new roof is best waterproofed before the screed and finish go down; an old terrace is usually repaired and top-coated rather than broken out. Either way, most failures are adhesion failures — clean the surface, open and fill cracks, and never skip the primer.
Waterproofing for sunken bathroom slabs, kitchens, balconies and other wet areas.
Most bathroom leaks start at the floor-to-wall joint and around pipes passing through the slab. Treat both, take the coat at least 150 mm up the walls and higher inside the shower, then flood-test for 24–48 hours before a single tile is laid.
Substructure waterproofing for basements and underground sumps, and systems for concrete water tanks.
Below-ground walls hold back water pressure from outside, so the system must suit the side it is applied from. For a drinking-water tank, confirm the specific product is approved for potable-water contact before it goes on.
The Trubuild Walltect system — primer, basecoat and topcoat — for damp, weather-beaten external walls.
Damp patches on the inside of an external wall usually mean water is entering through hairline cracks in the plaster. Filling the cracks and applying a primed coating system protects the wall far longer than repainting alone.
SBR latex bonding and repair agents, and flexible sealants for movement joints.
SBR latex improves the bond between old and new concrete or plaster and makes repair mortars more water-resistant. Expansion and movement joints need a flexible sealant rather than rigid cement, or they simply crack again.
Trufix cement-based tile adhesives, Stylo cementitious and epoxy grouts, and a PU-modified hybrid epoxy.
Choose the adhesive grade by tile size, location and substrate — a large tile on an external wall needs a far higher grade than a small tile indoors. Epoxy grout is worth the extra in showers and kitchens, because it does not absorb water or stain.
Categories shown represent the range stocked at our Udaipur showroom. Price bands are indicative market ranges to help you budget — not quotations. Contact us for current pricing and available models.
A roof slab heats up through a Rajasthan summer day and cools at night. Month after month of that movement opens hairline cracks, and the first heavy monsoon rain finds every one of them.
That is why an old terrace is repaired before it is coated, and why a flexible or elastomeric system outlasts a rigid one on an exposed roof. Trubuild describes its Rooftect coatings as heat-reflective, which also keeps the room below cooler.
Tiles and grout are not waterproof. The protection sits on the sunken slab underneath, and the two places it most often fails are the floor-to-wall joint and the pipes passing through the slab.
Cove every junction, seal every pipe penetration, carry the coat at least 150 mm up the walls and higher inside the shower, then flood-test for 24–48 hours before any tiling begins.
A coating is only as good as what it sticks to. Scrape off loose plaster and failed paint, clean away dust and algae, open up and fill the cracks, and let everything dry.
Prime the surface, then apply the coating in the number of coats the manufacturer specifies — thin coats, fully cured, rather than one heavy one.
Below ground, water pushes against the structure from outside. Whether the system goes on the outer face during construction or the inner face afterwards changes which product is right.
Plan basement and sump waterproofing before backfilling, when the outside wall is still reachable. For drinking-water tanks, confirm the product is approved for potable-water contact.
Damp patches and peeling paint on the inside of an external wall usually mean rain is getting in through hairline cracks in the plaster outside.
Repainting alone will not stop it. Fill the cracks, prime, and apply a wall-protection system such as Trubuild Walltect, which is built as a basecoat and topcoat.
Once the waterproofing has passed its flood test, lay tiles on a cement-based adhesive of the right grade for the tile size and location, not on a thick mortar bed that can trap water.
In showers and kitchens, an epoxy grout does not absorb water or stain, so the joints stay sealed and clean for years.
What actually matters when you are choosing — the questions worth settling before you buy.
Send your requirement and we’ll come back with options at different budget levels.
What customers ask most often about waterproofing solutions in udaipur — sizing, fitting, warranty and what to decide first.
Tell us what you're building and we'll help you specify the right products for your space, water pressure and budget — with no obligation to buy.
B-Block, 291, Main Road, Sector-14, Hiran Magri, Udaipur
